DSG Software

Custom-Code has been working relentlessly to develop and refine the Phase 1, 2 and 3 DSG performance upgrade calibrations, optimising the launch control, shift and torque limiter functions to give the ultimate driving experience. Countless hours have been spent engineering the DSG calibrations to perfectly complement our Custom-Code performance ECU calibrations.

Due to the nature of the DSG calibrations, not all of them are currently available for online purchase. The majority of our DSG software is already available to flash via FlashWire, but support for it depends on the type of DSG (DQ200, Late DQ250, Early DQ250, DQ500) you have fitted. The DQ200, DQ250 and the GS19 in the RS6 C6 are all currently supported by FlashWire, meaning you can flash them with Custom-Code from the comfort of your own home.

Use the remap search box above to search for your vehicle and see if DSG is available to purchase via FlashWire (it will have the 'Available through FlashWire' graphic below the product cost). If not, you can still visit an authorised Custom-Code dealer to have it installed. Please call us on +44 (0)1246 455004 if you require further compatibility information.

Our DSG calibrations are available for both petrol and diesel vehicles in 3 phases, resulting in 6 separate products; DSG Phase 1 Petrol, DSG Phase 2 Petrol, DSG Phase 3 Petrol, DSG Phase 1 Diesel, DSG Phase 2 Diesel and DSG Phase 3 Diesel. More details and technical information regarding the available Custom-Code DSG products are highlighted in the descriptions below.

 

 

Custom-Code DSG Phase 1 software can be run on a standard car and complements our full Custom-Code Phase 1, 2 and 3 ECU software, as well as our VVT Attack and DPF Delete software, with a choice of 3800 or 4200rpm (2500 or 3000rpm for diesel) launch control and enhanced shift points to perfectly suit your vehicle’s set up.

Custom-Code DSG Phase 2 software is aimed at drivers who demand the most from their cars. With the Phase 2 DSG software aimed at cars with more significant hardware modifications such as performance exhausts, superchargers and turbo upgrades, it delivers an exhilarating experience when combined with our Phase 2 or 3 ECU software.

Custom-Code DSG Phase 2 comes with fully customisable settings for launch control, torque settings and enhanced shift points to perfectly suit your vehicle’s set up.

For any requests regarding our DSG Software please speak to our technical support team on +44 (0)1246 455004 or alternatively send us an enquiry message.

DSG Phase 1 Petrol


DSG Phase 1 Petrol: 

Custom-Code DSG Phase 1 software can be run on a standard car and also complements our full Custom-Code Phase 1,2,3 and VVT Attack software, with a choice of 3800 or 4200rpm launch control and enhanced shift points to suit your vehicle set up.

 

Increased Redline and Shift Points:

Increasing the shift points gives you the command of your engine's power in the upper RPM range, we have raised the DSG transmission's rev limit and therefore the automatic shift points to 7000 rpm in S-mode and 6800 in D-mode, as this optimizes the engine's performance range and maintains the safe operating range of the engine's valve springs.

 

S-Mode

-New Redline Set

-Shift speed increased by 20%

-Automatic shift point increased to 7000rpm

-Increased Maximum Torque (550 Nm)

-No Auto Kick down

-Ability to drive in high or low gears at low speed without auto change

-Launch control enabled and set to 3800rpm

 

D-Mode

-New Redline Set

-Automatic shift point increased to 6800rpm

-Shift speed increased by 20%

 

M-Mode

-No auto kick down at redline (Optional)

-40% increase in paddle response

-Launch control enabled and set to 4200rpm

DSG Phase 1 Diesel


DSG Phase 1 Diesel:

Custom-Code DSG Phase 1 software can be run on a standard car and also complements our full Custom-Code Phase 1,2,3 and DPF delete software, with a choice of 2500 or 3000rpm launch control and enhanced shift points to suit your vehicle set up.

 

Increased Redline and Shift Points:

Increasing the shift points gives you the command of your engine's power in the upper RPM range, we have raised the DSG transmission's rev limit and therefore the automatic shift points to 4750 rpm in S-mode and 4500 in D-mode, as this optimizes the engine's performance range.

 

S-Mode

-New Redline Set

-Shift speed increased by 20%

-Automatic shift point increased to 4750rpm

-Increased Maximum Torque (550 Nm)

-No Auto Kick down

-Ability to drive in high or low gears at low speed without auto change

-Launch control enabled and set to 2500rpm

 

D-Mode

-New Redline Set

-Automatic shift point increased to 4500rpm

-Shift speed increased by 20%

 

M-Mode

-No Auto Kick down at redline (Optional)

-40% increase in paddle response

-Launch control enabled and set to 3000rpm

DSG Phase 2 Petrol


DSG Phase 2 Petrol:

Custom-Code DSG Phase 2 software is aimed at cars with more significant hardware modifications; Performance exhausts, supercharger and turbo upgrades and delivers an exhilarating experience when combined with our Phase 2,3 and VVT software, with fully custom settings for launch control, torque settings and enhanced shift points to suit your vehicle set up.

 

Increased Redline and Shift Points:

Increasing the shift points gives you the command of your engine's power in the upper RPM range, we have raised the DSG transmission's rev limit and therefore the automatic shift points to 7000 rpm in S-mode and 6800 in D-mode, as this optimizes the engine's performance range and maintains the safe operating range of the engine's valve springs.  (Both adjustable to your spec with Phase 2)

 

S-Mode

-New Redline Set

-Shift speed increased by 20%

-Automatic shift point increased to 7000rpm (Custom settings Available)

-Increased Maximum Torque (550 Nm) (Custom settings Available)

-No Auto Kick down or up shifting

-Ability to drive in high or low gears at low speed without auto change

-Launch control enabled and set to 3800rpm (Custom settings Available)


D-Mode

-New Redline Set

-Automatic shift point increased to 6800rpm (Custom settings Available)

-Shift speed increased by 20%

 

M-Mode

-No Auto Kick down or up shifting at redline(Optional)

-40% increase in paddle response

-Launch control enabled and set to 4000rpm (Custom settings Available)

DSG Phase 2 Diesel


DSG Phase 2 Diesel:

Custom-Code DSG Phase 2 software is aimed at cars with more significant hardware modifications; Performance exhausts, supercharger and turbo upgrades and delivers an exhilarating experience when combined with our Phase 2,3 and DPF delete software, with fully custom settings for launch control, torque settings and enhanced shift points to suit your vehicle set up.

 

Increased Redline and Shift Points:

Increasing the shift points gives you the command of your engine's power in the upper RPM range, we have raised the DSG transmission's rev limit and therefore the automatic shift points to 4800 rpm in S-mode and 4500 in D-mode, as this optimizes the engine's performance range whilst maintaining the safe operating range of components (Both adjustable to your spec with Phase 2)

 

S-Mode

-New Redline Set

-Shift speed increased by 20%

-Automatic shift point increased to 4750rpm (Custom settings Available)

-Increased Maximum Torque (550 Nm) (Custom settings Available)

-No Auto Kick down or up shifting

-Ability to drive in high or low gears at low speed without auto change

-Launch control enabled and set to 2500rpm (Custom settings Available)

 

D-Mode

-New Redline Set

-Automatic shift point increased to 4500rpm (Custom settings Available)

-Shift speed increased by 20%

 

M-Mode

-No Auto Kick down or up shifting at redline(Optional)

-40% increase in paddle response

-Launch control enabled and set to 3000rpm (Custom settings Available)





/// What makes Custom-Code Software the best?


Fuel pump

Improved Fuel Economy

With a Custom-Code remap your engine is running more efficiently and therefore you will experience improved fuel economy. With the extra torque you’re also able to change gears lower down the rev range which will return better MPG.

Read More »

30 Day satisfaction guarantee

30 Day satisfaction guarantee

Here at Custom-Code we’re so confident that you will love our remaps that we offer a 30 day satisfaction guarantee. That means if you’re not satisfied for what ever reason then we will happily refund you in full within the first 30 days of purchase.

Read More »

Audi tuner gold

Award winning technology

It’s not just us that think our ECU software is the industry’s best, Custom-Code has won the prestigious Audi Driver Gold Award for tuning the last 6 years running. 

Read More »

Reliability

Engine Reliability

We perform extensive on-road tests with all our maps to ensure your engine not only reaches its full potential but also that it doesn’t cause any unnecessary wear or damage.

Read More »